Table of Contents
Advertisement
Voice VLAN Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Default Configuration
46
Command Mode
Global Configuration mode
Example
The following example sets 63 as the voice VLAN DSCP.
switchxxxxxx(config)# voice vlan dscp
For Auto Voice VLAN, changes in the voice VLAN ID, CoS/802.1p, and/or DSCPwill
cause the switch to advertise the administrative voice VLAN as static voice
VLANwhich has higher priority than voice VLAN learnt from external sources.
Are you sure you want to continue? (Y/N)[Y] Y
30-Apr-2011 00:31:07 %VLAN-W-BestLocal!=Oper: inconsistency detected, VSDP voice
VLAN configuration differs from best local. Best local is Voice VLAN-ID 104, VPT
7, DSCP 46
switchxxxxxx(config)# 30-Apr-2011 00:31:22 %VLAN-I-ReceivedFromVSDP: Voice VLAN
updated by VSDP. Voice VLAN-ID 104, VPT 7, DSCP 63
68.8 voice vlan oui-table
To configure the voice OUI table, use the voice vlan oui-table Global Configuration
mode command. To restore the default configuration, use the no form of this
command.
Syntax
{add mac-address-prefix | remove mac-address-prefix}
voice vlan oui-table
no voice vlan oui-table
Parameters
•
mac-address-prefix
add
voice VLAN OUI table (length: 3 bytes).
•
mac-address-prefix
remove
from the voice VLAN OUI table (length: 3 bytes).
63
—Adds the specified MAC address prefix to the
—Removes the specified MAC prefix address
68
text
[
]
1310
Advertisement
Table of Contents
