Yamaha FX10X Service Manual page 526

Hide thumbs Also See for FX10X:

CRANKSHAFT AND BALANCER SHAFT

Measurement steps:

Do not interchange the crankshaft journal bear-

ings. To obtain the correct crankshaft-journal-

to-crankshaft-journal-bearing

prevent engine damage, the crankshaft journal

bearings must be installed in their original posi-

• Clean the crankshaft journal bearings, crank-

shaft journals, and bearing portions of the

• Place the upper crankcase upside down on a

• Install the crankshaft journal upper bearings 1

and the crankshaft into the upper crankcase.

Align the projections a of the crankshaft journal

upper bearings with the notches b in the crank-

• Put a piece of Plastigauge

shaft journal.

Do not put the Plastigauge

crankshaft journal.

• Install the crankshaft journal lower bearings 2

into the lower crankcase and assemble the

crankcase halves.

• Align the projections c of the crankshaft journal

lower bearings with the notches d in the crank-

• Do not move the crankshaft until the clearance

measurement has been completed.

b on each crank-

over the oil hole in the

Show Quick Links

Chapters