Yamaha FX10X Service Manual page 272

Hide thumbs Also See for FX10X:

SECONDARY SHEAVE

• Ramp shoe thickness a

Out of specification → Replace the ramp

1.0 mm (0.04 in)

• Secondary sheave spring 1

• Spring seat 2

Hook the end of the secondary sheave spring into

the spring holes in the fixed sheave. Hook the other

end of the spring into the holes in the spring seat.

Standard spring position:

2-6 (FX10/FX10RT/FX10RTR/FX10RTRA)

1-6 (FX10MT/FX10MTR/FX10MTRA)

Installation steps:

• Hold the spring seat 1 and turn the fixed

sheave 2 counterclockwise to the specified

The holes in the spring seat should align with the

bolts on the sliding sheave.

a = (sheave hole number + spring seat hole

number) × 10

Twist angle:

80° (FX10/FX10RT/FX10RTR/

70° (FX10MT/FX10MTR/FX10MTRA)

• Push down on the spring seat until the bolts

come through the holes.

• While pushing down on the spring seat, install

the nuts and tighten them to the specified

Spring seat nut:

23 Nm (2.3 m · kg, 17 ft · lb)

Show Quick Links

Chapters