Yamaha FX10X Service Manual page 396

Hide thumbs Also See for FX10X:

EXHAUST PIPE AND MUFFLER

INSTALLATION

• Exhaust pipe 1 (temporarily)

Install the exhaust pipe to the brackets on the

frame, making sure to position it as far rearward as

possible, and then temporarily tighten the exhaust

• Exhaust pipe joint gasket

• Exhaust pipe joint

• Exhaust pipe band

• After installing the exhaust pipe joints, fit the

exhaust pipe into them.

• Temporarily tighten the exhaust pipe band bolts;

do not torque them at this point.

• Muffler band 1

• Align the projection a on the muffler band with

the slot b on the muffler.

• Temporarily tighten the muffler band bolt and

muffler bolts; do not torque them at this point.

• Exhaust pipe band bolts

• Muffler bolts

First tighten the bolts on the rear side of the muffler,

and then tighten the bolts on the front side.

Exhaust pipe band bolt:

9 Nm (0.9 m · kg, 6.5 ft · lb)

Muffler bolt:

23 Nm (2.3 m · kg, 17 ft · lb)

Show Quick Links

Chapters