Yamaha FX10X Service Manual page 194

Hide thumbs Also See for FX10X:

REAR SUSPENSION

Control rod (FX10MT/FX10MTR/FX10MTRA)

• Control rod stroke a

Make sure the adjusting nut ends are set at the

same position on each side.

Adjustment steps:

• Loosen the locknut 1.

• Turn the adjusting nut 2 in or out to adjust the

control rod stroke.

Adjusting nut

Never adjust the control rods beyond the maxi-

mum range indicated on the rods with red paint

• While holding the adjusting nut securely, tighten

the locknut 1.

25 Nm (2.5 m · kg, 18 ft · lb)

Show Quick Links

Chapters