Yamaha FX10X Service Manual page 224

Hide thumbs Also See for FX10X:

• Handlebar 1

• Handlebar holders 2

• The handlebar holders should be installed with

the punch marks a facing forward.

• Align the punch mark b on the handlebar with

the upper surface of the lower handlebar holder.

• Align the punch mark b on the handlebar with

the upper surface of the steering joint. (FX10RT/

FX10RTR/FX10RTRA/FX10MT/FX10MTR/

First, tighten the bolts on the front side of the

handlebar holder, and then on the rear side.

For FX10/FX10RT/FX10RTR/FX10RTRA

• Wind deflector bracket holder 1

• Wind deflector bracket 2

Align the end of the wind deflector bracket with the

punch mark a on the handlebar.

10. Install:

Install the handlebar cover 1, making sure not to

pinch the cables, leads, etc.

• Throttle cable free play

Refer to "THROTTLE CABLE FREE PLAY

ADJUSTMENT" in CHAPTER 2.

Handlebar holder bolt:

23 Nm (2.3 m · kg, 17 ft · lb)

FX10RTR/FX10RTRA/FX10MTRA)

(FX10/FX10RT/

Show Quick Links

Chapters