Yamaha FX10X Service Manual page 556

Hide thumbs Also See for FX10X:

• Rubber damper holder 1

• Rubber damper 2

Before installing the rubber damper, apply tap

water or coolant onto its outer surface.

• Impeller shaft tilt

Out of specification → Repeat steps (4) and

Make sure the rubber damper and rubber

damper holder are flush with the impeller.

Max. impeller shaft tilt:

0.15 mm (0.0059 in)

1 Straightedge

INSTALLATION

• "I" mark a on the AC magneto rotor

(with the stationary pointer b on the AC mag-

Turn the crankshaft clockwise.

• Water pump assembly

Water pump assembly bolt:

12 Nm (1.2 m · kg, 8.7 ft · lb)

Show Quick Links

Chapters