Yamaha FX10X Service Manual page 148

Hide thumbs Also See for FX10X:

BATTERY INSPECTION/FUSE INSPECTION

• Battery bracket

• Battery leads

First, connect the positive battery lead 1, then

the negative battery lead 2.

• Battery terminals

11. Lubricate:

• Battery terminals

FUSE INSPECTION

The following procedure applies to all of the fuses.

To avoid a short circuit, always turn the main

switch off when checking or replacing a fuse.

• Right side cover

• Continuity

Inspection steps:

• Connect the pocket tester to the fuse and check

the continuity.

Set the pocket tester selector to "Ω × 1".

• If the pocket tester indicates "∞", replace the

(to the battery terminals)

Dirt → Clean with a wire brush.

Loose connection → Connect properly.

Recommended lubricant:

Dielectric grease

Refer to "COVERS" in CHAPTER 3.

Pocket tester:

Analog pocket tester:

Show Quick Links

Chapters