Yamaha FX10X Service Manual page 126

Hide thumbs Also See for FX10X:

STEERING SYSTEM

Toe-out adjustment

1. Place the snowmobile on a level surface.

Adjustment steps:

• Remove the shroud.

• Loosen the locknuts (tie-rods) 1.

• Turn the tie rods 2 in or out until the specified

• Tighten the locknuts (tie-rods) 1.

After tightening the inside and outside ball joint

locknuts 1, make sure the tie rods 2 can be

rotated freely through the ball joint travel. If not,

loosen the locknuts 1 and reposition the ball

joint so that the tie rods 2 can be rotated freely.

Tighten the locknuts to specification.

• Ski toe-out (a – c)

• Ski stance b

Point the skis forward.

Out of specification → Adjust.

Ski toe-out:

0 ~ 15 mm (0 ~ 0.59 in)

Ski stance (center to center):

FX10/FX10RT/FX10RTR/FX10RTRA

1,050 mm (41.3 in)

FX10MT/FX10MTR/FX10MTRA

980 mm (38.6 in)

• Ski toe-out

Refer to "COVERS" in CHAPTER 3.

toe-out is obtained.

Tie-rod end locknut:

25 Nm (2.5 m · kg, 18 ft · lb)

Show Quick Links

Chapters