Spanning-Tree Transmit Hold-Count - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
spanning-tree transmit hold-count
spanning-tree transmit hold-count
Use the spanning-tree transmit hold-count global configuration command to configure the number of
bridge protocol data units (BPDUs) sent every second. Use the no form of this command to return to the
default setting.
Syntax Description
value
Defaults
The default is 6.
Command Modes
Global configuration
Command History
Release
12.2(25)SEF
Usage Guidelines
Increasing the transmit hold-count value can have a significant impact on CPU utilization when the
switch is in rapid-per-VLAN spanning-tree plus (rapid-PVST+) mode. Decreasing this value might slow
down convergence. We recommend using the default setting.
Examples
This example shows how to set the transmit hold count to 8:
Switch(config)# spanning-tree transmit hold-count 8
You can verify your setting by entering the show spanning-tree mst privileged EXEC command.
Related Commands
Command
show spanning-tree
Cisco Catalyst Blade Switch for HP Command Reference
2-474
spanning-tree transmit hold-count [value]
no spanning-tree transmit hold-count [value]
(Optional) Number of BPDUs sent every second. The range is 1 to 20.
Modification
This command was introduced.
mst
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
Description
Displays the multiple spanning-tree (MST) region configuration
and status, including the transmit hold count.
OL-8916-01
Advertisement
Table of Contents
