Shutdown - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
2 V ]
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
shutdown
Use the shutdown interface configuration command to disable an interface. Use the no form of this
command to restart a disabled interface.
Syntax Description
This command has no arguments or keywords.
Defaults
The port is enabled (not shut down).
Command Modes
Interface configuration
Command History
Release
12.2(25)SEF
Usage Guidelines
The shutdown command causes a port to stop forwarding. You can enable the port with the no shutdown
command.
The no shutdown command has no effect if the port is a static-access port assigned to a VLAN that has
been deleted, suspended, or shut down. The port must first be a member of an active VLAN before it can
be re-enabled.
The shutdown command disables all functions on the specified interface.
This command also marks the interface as unavailable. To see if an interface is disabled, use the show
interfaces privileged EXEC command. An interface that has been shut down is shown as
administratively down in the display.
Examples
These examples show how to disable and re-enable a port:
Switch(config)# interface gigabitethernet0/2
Switch(config-if)# shutdown
Switch(config)# interface gigabitethernet0/2
Switch(config-if)# no shutdown
You can verify your settings by entering the show interfaces privileged EXEC command.
Related Commands
Command
show interfaces
OL-8916-01
shutdown
no shutdown
Modification
This command was introduced.
Description
Displays the statistical information specific to all interfaces or to a specific
interface.
Cisco Catalyst Blade Switch for HP Command Reference
shutdown
2-423
Advertisement
Table of Contents
