Cisco 3020 - Catalyst Blade Switch Command Reference Manual page 308
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
show controllers ethernet-controller
Table 2-17
Transmit Field Descriptions (continued)
Field
Description
5 collision frames
The number of frames that are successfully sent on an interface after five collisions occur.
6 collision frames
The number of frames that are successfully sent on an interface after six collisions occur.
7 collision frames
The number of frames that are successfully sent on an interface after seven collisions occur.
8 collision frames
The number of frames that are successfully sent on an interface after eight collisions occur.
9 collision frames
The number of frames that are successfully sent on an interface after nine collisions occur.
10 collision frames
The number of frames that are successfully sent on an interface after ten collisions occur.
11 collision frames
The number of frames that are successfully sent on an interface after 11 collisions occur.
12 collision frames
The number of frames that are successfully sent on an interface after 12 collisions occur.
13 collision frames
The number of frames that are successfully sent on an interface after 13 collisions occur.
14 collision frames
The number of frames that are successfully sent on an interface after 14 collisions occur.
15 collision frames
The number of frames that are successfully sent on an interface after 15 collisions occur.
Excessive collisions
The number of frames that could not be sent on an interface after 16 collisions occur.
Late collisions
After a frame is sent, the number of frames dropped because late collisions were detected while the
frame was sent.
VLAN discard frames
The number of frames dropped on an interface because the CFI
Excess defer frames
The number of frames that are not sent after the time exceeds the maximum-packet time.
64 byte frames
The total number of frames sent on an interface that are 64 bytes.
127 byte frames
The total number of frames sent on an interface that are from 65 to 127 bytes.
255 byte frames
The total number of frames sent on an interface that are from 128 to 255 bytes.
511 byte frames
The total number of frames sent on an interface that are from 256 to 511 bytes.
1023 byte frames
The total number of frames sent on an interface that are from 512 to 1023 bytes.
1518 byte frames
The total number of frames sent on an interface that are from 1024 to 1518 bytes.
Too large frames
The number of frames sent on an interface that are larger than the maximum allowed frame size.
Good (1 coll) frames
The number of frames that are successfully sent on an interface after one collision occurs. This value
does not include the number of frames that are not successfully sent after one collision occurs.
1. CFI = Canonical Format Indicator
Table 2-18
Receive Field Descriptions
Field
Bytes
Unicast frames
Multicast frames
Broadcast frames
Cisco Catalyst Blade Switch 3020 for HP Command Reference
2-282
Description
The total amount of memory (in bytes) used by frames received on an interface, including the
1
FCS
value and the incorrectly formed frames. This value excludes the frame header bits.
The total number of frames successfully received on the interface that are directed to unicast
addresses.
The total number of frames successfully received on the interface that are directed to multicast
addresses.
The total number of frames successfully received on an interface that are directed to broadcast
addresses.
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
1
bit is set.
OL-8916-01
Advertisement
Table of Contents
