Port-Channel Load-Balance - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
port-channel load-balance
port-channel load-balance
Use the port-channel load-balance global configuration command to set the load-distribution method
among the ports in the EtherChannel. Use the no form of this command to return to the default setting.
Syntax Description
dst-ip
dst-mac
src-dst-ip
src-dst-mac
src-ip
src-mac
Defaults
The default is src-mac.
Command Modes
Global configuration
Command History
Release
12.2(25)SEF
Usage Guidelines
For information about when to use these forwarding methods, see the "Configuring EtherChannels"
chapter in the software configuration guide for this release.
Examples
This example shows how to set the load-distribution method to dst-mac:
Switch(config)# port-channel load-balance dst-mac
You can verify your setting by entering the show running-config privileged EXEC command or the
show etherchannel load-balance privileged EXEC command.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
2-240
port-channel load-balance {dst-ip | dst-mac | src-dst-ip | src-dst-mac | src-ip | src-mac}
no port-channel load-balance
Load distribution is based on the destination host IP address.
Load distribution is based on the destination host MAC address. Packets to the same
destination are sent on the same port, but packets to different destinations are sent on
different ports in the channel.
Load distribution is based on the source and destination host IP address.
Load distribution is based on the source and destination host MAC address.
Load distribution is based on the source host IP address.
Load distribution is based on the source MAC address. Packets from different hosts use
different ports in the channel, but packets from the same host use the same port.
Modification
This command was introduced.
Chapter 2
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
OL-8916-01
Advertisement
Table of Contents
