Cisco 3020 - Catalyst Blade Switch Command Reference Manual page 172
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
link state group
Examples
This example shows how to configure the interfaces as upstream in group 2:
Switch# configure terminal
Switch(config)# interface range gigabitethernet0/23 - 24
Switch(config-if)# link state group 2 upstream
Switch(config-if)# end
If the interfaces are part of an EtherChannel, you must specify the port channel name as part of the link
Note
state group, not the individual port members.
This example shows how to create a link-state group using ports in an EtherChannel:
Switch# configure terminal
Switch(config)# link state track 1
Switch(config)# interface P01
Switch(config-if)# link state group 1 upstream
Switch(config-if-range)# interface range gigabitethernet0/1, gigabitethernet0/3,
gigabitethernet0/5
Switch(config-if)# link state group 1 downstream
Switch(config-if)# end
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
Command
link state track
show link state group
show running-config
Cisco Catalyst Blade Switch 3020 for HP Command Reference
2-144
Chapter 2
Description
Enables a link-state group.
Displays the link-state group information.
Displays the current operating configuration. For syntax information, select
Cisco IOS Configuration Fundamentals Command Reference for
Release 12.2 > Cisco IOS File Management Commands > Configuration
File Commands.
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
OL-8916-01
Advertisement
Table of Contents
