hit counter script

Ip Igmp Snooping - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs Also See for 3020 - Cisco Catalyst Blade Switch:
Table of Contents

Advertisement

ip igmp snooping

ip igmp snooping
Use the ip igmp snooping global configuration command to globally enable Internet Group
Management Protocol (IGMP) snooping on the switch or to enable it on a per-VLAN basis. Use the no
form of this command to return to the default setting.
Syntax Description
vlan vlan-id
Defaults
IGMP snooping is globally enabled on the switch.
IGMP snooping is enabled on VLAN interfaces.
Command Modes
Global configuration
Command History
Release
12.2(25)SEF
Usage Guidelines
When IGMP snooping is enabled globally, it is enabled in all the existing VLAN interfaces. When IGMP
snooping is globally disabled, it is disabled on all the existing VLAN interfaces.
VLAN IDs 1002 to 1005 are reserved for Token Ring and FDDI VLANs and cannot be used in IGMP
snooping.
Examples
This example shows how to globally enable IGMP snooping:
Switch(config)# ip igmp snooping
This example shows how to enable IGMP snooping on VLAN 1:
Switch(config)# ip igmp snooping vlan 1
You can verify your settings by entering the show ip igmp snooping privileged EXEC command.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
2-120
ip igmp snooping [vlan vlan-id]
no ip igmp snooping [vlan vlan-id]
(Optional) Enable IGMP snooping on the specified VLAN. The range is 1 to
1001 and 1006 to 4094.
Modification
This command was introduced.
Chapter 2
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
OL-8916-01

Advertisement

Table of Contents
loading

Table of Contents