Subscriber Redundancy - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Subscriber Commands
subscriber redundancy
To enable subscriber redundancy feature globally in BNG and to enter the subscriber redundancy configuration
sub mode, use the subscriber redundancy command in Global Configuration mode. To remove the
configurations for subscriber redundancy feature in BNG, use the no form of this command.
subscriber redundancy
no subscriber redundancy
This command has no keywords or arguments.
Command Default
None
Command Modes
Global configuration.
Command History
Release
Release 5.2.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The option slave-mode is not supported in BNG geo redundancy. The default redundancy mode is hot-standby.
Task ID
Task ID
config-services
Examples
This example shows how to enter subscriber redundancy sub mode to configure subscriber redundancy options:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# subscriber redundancy
RP/0/RSP0/CPU0:router(config-subscr-red)#
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
Operation
read, write
subscriber redundancy
5.2.x
525
Advertisement
Chapters
Table of Contents
