Policy-Map Type Pbr - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Control Policy Commands
policy-map type pbr
To create or modify a policy map of type policy based routing that can be attached to one or more interfaces,
use the policy-map type pbr command in Global Configuration mode. To disable this feature, use the no
form of this command.
policy-map type pbr name
no policy-map type pbr name
Syntax Description
policy-map name
Command Default
None
Command Modes
Global Configuration mode
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
qos
Examples
This is an example of configuring the policy-map type pbr command in the Global Configuration mode:
RP/0/RSP0/CPU0:router(config)# policy-map type pbr pbr_policy
RP/0/RSP0/CPU0:router(config-pmap)# end-policy-map
Related Commands
Command
class-map type control subscriber, on page 120
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Represents the policy map name.
Modification
This command was introduced.
Operation
read, write
Description
Enables the class-map.
policy-map type pbr
5.2.x
131
Advertisement
Chapters
Table of Contents
