Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

debug ethernet cfm protocol-state

ethernet-services

The following example shows a sample output of the debug ethernet cfm protocol-state command.

RP/0/RSP0/CPU0:router# debug ethernet cfm protocol-state

RP/0/RSP0/CPU0:May 29 14:41:49.966 : cfmd[150]: CFM: Created 1 local MEPs in PM and Engine

RP/0/RSP0/CPU0:May 29 14:41:49.967 : cfmd[150]: CFM: State changes notification for 1 EFPs

RP/0/RSP0/CPU0:May 29 14:42:14.143 : cfmd[150]: CFM: New remote MEP detected in domain foo,

service foo for local MEP ID 1 on interface GigabitEthernet0/1/0/0; remote MEP ID 16, MAC

0001.0203.0402, errors: set: mismatched MAID; current: mismatched MAID;

RP/0/RSP0/CPU0:May 29 14:42:16.644 : cfmd[150]: CFM: Fault alarm notification for local MEP

- domain: foo, service: foo, MEP ID: 1, interface: GigabitEthernet0/1/0/0, defect:

cross-connect CCM

RP/0/RSP0/CPU0:May 29 14:43:32.247 : cfmd[150]: CFM: Initiated exploratory linktrace to

ffff.ffff.ffff from MEP in domain foo, service foo, MEP ID 1, interface GigabitEthernet0/1/0/0

with ttl 64 and transaction ID 65537, reply-filtering Default and directed MAC None

May 29 14:43:49.155 : cfmd[150]: CFM: Remote MEP timed out in domain foo, service foo for

local MEP ID 1 on interface GigabitEthernet0/1/0/0; remote MEP ID 16, MAC 0001.0203.0402,

errors: cleared: mismatched MAID; current: none

Related Commands

debug ethernet cfm packets, on page 196

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

Logs debug messages about CFM packets that are sent or received

by the Ethernet CFM process.

Show Quick Links

Table of Contents