Table of Contents
Advertisement
Cisco ASR 1004 Router Specifications
Table A-9
Cisco ASR 1004 Router Specifications (continued)
Description
Storage temperature
Power consumption
Cisco ASR 1004 Router Memory and Storage Options
Table A-10
Table A-10
Memory and Storage Options for Cisco ASR 1004 Router
Memory Type
RP1
eUSB
Cisco ASR 1004 Router Ethernet RJ-45 Port Pinouts
The Cisco ASR 1004 Router has RJ-45 port for the 10/100/1000 Ethernet connection. The RJ-45 port
supports IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with
10BASET, 100BASETX, and 1000BASET specifications.
The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45
connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially. See
Figure A-1
Cisco ASR 1004 Router MGMT Ethernet Port Signals and Pinouts
Table A-11
Table A-11
Pin
1
2
3
4, 5
6
7,8
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
A-6
Specification
–38° to 150° F
•
–40° to 70° C
•
Maximum DC: 1020W
•
Maximum AC: 960W
•
Maximum (Out): 765W
•
lists the hardware memory and storage options supported on the Cisco ASR 1004 Router.
Default
2 GB DRAM
1 GB (Partitioned: 2x32MB for
NVRAM and the remaining for
mass storage
to see an RJ-45 port and connector.
lists the RJ-45 port pinouts for the front panel Management Ethernet port.
RJ-45 Management Ethernet Port Pinouts for the Cisco ASR 1004 Router
Signal
TX Data+
TX Data–
RX Data+
NC
RX Data–
NC
Appendix A
Cisco ASR 1000 Series Router Specifications
Maximum System Support
4 GBDRAM
For mass storage: hard disk drive 40 GB or solid-state
drive 32Gb support
Direction
Output
Output
Input
—
Input
—
Description
Transmit Data
Transmit Data
Receive Data
—
Receive Data
—
OL-13208-11
Advertisement
Chapters
Table of Contents
Troubleshooting
