Table of Contents
Advertisement
Chapter 11
Cisco ASR 1013 Router Overview and Installation
If you are using a two-post rack secure the rack to the floor surface to prevent tipping and avoid bodily
Caution
injury and component damage.
To install the Cisco ASR 1013 chassis on a two-post equipment rack, with the forward rack-mount
brackets, follow these steps:
Step 1
Position the chassis so the front is closest to you and lift it carefully into the rack. To prevent injury,
avoid any sudden twists or moves.
Step 2
Slide the chassis into the rack, pushing it back until the brackets meet the mounting strips or posts on
both sides of the rack.
Keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the
Step 3
holes on the rack or mounting strip.
For each bracket, insert and tighten two screws to the rack on both sides.
Step 4
Note
This completes the procedure for installing the chassis on a two-post rack. Proceed to the
Chassis Ground Connection" section on page 11-24
Four-Post Rack Installation
The Cisco ASR 1013 Router can be flush-mounted in a 19-inch equipment rack using the rack-mounting
kit provided with your system. The Cisco ASR 1013 Router can be mounted into the rack using two
recommended methods:
•
•
OL-13208-11
Use the third hole up from the bottom of the rack-mount bracket and the third hole down from
the top of the rack-mount bracket. See
on the rack-mount bracket.
Installing the chassis in an existing rack with equipment.
Installing an empty chassis in a rack with no equipment installed.
Because the Cisco ASR 1013 chassis is very heavy, it is recommended that the chassis be
Note
installed at the bottom of the rack if you are planning to install more than one Cisco
ASR 1013 chassis in the same rack.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
Rack-Mounting the Cisco ASR 1013 Router
Figure 11-9
for the position and location of the ear holes
to continue the installation.
"Attaching a
11-19
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Cisco ASR 1000 series
Related Products for Cisco ASR 1000 series
- Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
- Cisco ASR1000-RP2 - ASR 1000 Series Route Processor 2 Router
- Cisco ASR-1000-SIP10
- Cisco ASR 1001
- Cisco ASR1002-5G-SEC/K9 - ASR 1002 VPN+FW Bundle Router
- Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router
- Cisco ASR1002-10G-VPN/K9 - ASR 1002 VPN Bundle Router
- Cisco ASR1002-5G-HA/K9 - ASR 1002 HA Bundle Router