Equipment Shelf or Tabletop Installation
Equipment Shelf or Tabletop Installation
To mount your Cisco ASR 1004 Router on an equipment shelf or tabletop, follow these steps.
Step 1
Remove any debris and dust from the tabletop or platform, as well as the surrounding area.
Step 2
Lift the chassis into position on the equipment shelf or tabletop (see
At least two people are required to lift the chassis onto a tabletop or platform. To prevent injury, keep
Warning
your back straight and lift with your legs, not your back. Statement 164
Figure 7-5
Note
Attach the front rack-mount brackets. Locate the threaded holes in the front sides of the chassis (first
Step 1
holes beyond the vent holes) and use the package of black screws that shipped with the chassis.
Align the front rack-mount bracket to one side of the chassis.
Step 2
Insert and tighten the screws on one side.
Step 3
Repeat Step 2 through Step 3 on the other side of the chassis. Use all the screws to secure the rack-mount
Step 4
brackets to the chassis.
Note
Gather the two cable-management brackets and screws shipped with your chassis.
Step 5
attached cable-management brackets on the front of the Cisco ASR 1004 Router.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
7-8
Lifting the Chassis
FANS
FAN
OK
MULTI-
FAILUR
E
FAN
FAILUR
E
When hot
remov al
be done
and replac
system
shutdo
1
2
3
4
CISCO
10000
CISCO
CISCO
10000
10000
CISCO
10000
POW ER
FAUL T
MISW IRE
POW ER
FAUL T
MISW IRE
The chassis in
Figure 7-5
does not represent the Cisco ASR 1004 Router. This is only an example
of how to lift a Cisco chassis.
The cable-management brackets are installed on the chassis after you install the chassis
rack-mount brackets and mount the chassis in the rack.
Chapter 7
CAUT ION
swapp ing
this fan
ement
tray,
in under
two minute
must
wn will
s or
occur.
0A
PRO CES
SOR ONL
0B
Y
5
6
7
CISCO
8
10000
CISCO
10000
CISCO
CISCO
10000
10000
CISCO
10000
CISCO
10000
PRO CES
SOR ONL
Y
Cisco ASR 1004 Router Overview and Installation
Figure
7-5).
Figure 7-6
shows
OL-13208-11