Table of Contents
Advertisement
Checking the Shipping Container Contents
Unpacking and Verifying Shipping Contents
When you receive your chassis, perform the following steps and use the shipping contents checklist from
the next section:
Inspect the box for any shipping damage. (if there is damage contact your service representative).
Step 1
Unpack the Cisco ASR 1000 Series Router.
Step 2
Perform a visual inspection of the chassis.
Step 3
After you have unpacked the system verify that you have received all of the required components. Using
Step 4
the packing list as a guide, take the following steps to check the contents of the Cisco ASR 1000 Series
Router shipping container:
Check the contents of the boxes containing accessory items. Verify that you have received all equipment
Step 5
listed in your order.
Check that all Cisco ASR 1000 Series route processors, Cisco ASR 1000 Series embedded services
Step 6
processors, Cisco ASR 1000 Series SPA interface processors (SIPs), and power supplies you ordered are
installed in the chassis. Ensure that the configuration matches the packing list.
Checking the Shipping Container Contents
Use the components list shown in
shipping container. Do not discard the shipping container. You need the container if you move or ship
the Cisco ASR 1000 Series Router in the future.
Table 5-8
Component
Chassis
Accessories Kit
ESD, Wrist Strap (disposable)
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
5-24
Table 5-8
Cisco ASR 1000 Series Router Shipping Container Contents
Description
Cisco ASR 1000 Series Router configured with dual AC or dual DC power supplies
and a shared port adapter blank panel if a shared port adapter has not been ordered.
Front and rear chassis rack-mount brackets that you will attach to the chassis with the
respective screws
Three sets of screws, one set for:
•
Front rack-mount brackets (use the black screws)
•
Rear rack-mount brackets (use the package with the 5 screws)
•
Cable-management brackets (use the package with the 4 screws)
Two cable-management brackets with U-feature design devices attached, with a
different size for each chassis.
1 RJ-45 to RJ-45 crossover cable
1 RJ-45 to DB-9 (female) adapter
One disposable wrist strap
Chapter 5
to check the contents of the Cisco ASR 1000 Series Router
Preparing Your Site for Installation
OL-13208-11
Advertisement
Chapters
Table of Contents
Troubleshooting
