Cisco 40-Gigabit Qsfp+ Transceiver Modules Installation - Cisco ASR 9000 Series Installation Manual
Aggregation services router ethernet line card
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Chapter 2
Installing Line Cards in the Cisco ASR 9000 Series Router
Cisco 40-Gigabit QSFP+ Transceiver Modules Installation
This section provides the installation, cabling, and removal instructions for the 40-Gigabit Quad Small
Form-Factor Pluggable Plus (QSFP+) transceiver modules. The modules are hot-swappable input/output
(I/O) devices that connect the system's module port electrical circuitry with either a copper or a
fiber-optic network.
•
•
•
•
•
•
Overview
The 40-Gigabit (GE) QSFP+ transceiver module is a hot-swappable, parallel fiber-optical module with
four independent optical transmit and receive channels. These channels can terminate in another
40-Gigabit QSFP+ transceiver, or the channels can be broken out to four separate 10-Gigabit SFP+
transceivers. The QSFP+ transceiver module connects the electrical circuitry of the system with an
optical external network.
Figure 2-33
applications in switches, routers, and data center equipment where it provides higher density than SFP+
modules.
Figure 2-33
40-Gigabit QSFP+ Transceiver Module (Optical)
2
1
3
1
40GBASE QSFP+ transceiver body
2
Bail-clasp latch
Overview, page 2-51
Specifications, page 2-52
Required Tools, page 2-54
Installing the 40-Gigabit QSFP+ Transceiver Module, page 2-54
Attaching the Optical Network Cable, page 2-56
Removing the 40-Gigabit QSFP+ Transceiver Module, page 2-57
shows the optical QSFP+ transceiver. The transceiver is used primarily in short reach
3
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
Cisco 40-Gigabit QSFP+ Transceiver Modules Installation
1
3
Electrical connection to the module circuitry
2-51
Advertisement
Table of Contents
Troubleshooting
