Removing A 10-Gigabit Ethernet Xfp Transceiver Module - Cisco ASR 9000 Series Installation Manual
Aggregation services router ethernet line card
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Chapter 2
Installing Line Cards in the Cisco ASR 9000 Series Router
Figure 2-24
Immediately reinstall the dust plug in the XFP transceiver optical bores. Do not remove the dust plug
Step 8
until you are ready to attach the network interface cable.
Note
Removing a 10-Gigabit Ethernet XFP Transceiver Module
The XFP transceiver is a static-sensitive device. Always use an ESD wrist strap or similar individual
Caution
grounding device when handling XFP transceivers or coming into contact with modules.
If you are removing an XFP transceiver, follow these steps:
Step 1
Disconnect the network interface cable from the XFP transceiver connectors. Immediately reinstall the
dust plug in the fiber-optic cable LC connector.
Installing the 10-Gigabit Ethernet XFP Transceiver Module
A/ L
0
A/ L
1
10-Gigabit XFP transceivers are keyed to prevent incorrect insertion.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
A/ L
0
A/ L
1
Installing and Removing XFP Modules
2-41
Advertisement
Table of Contents
Troubleshooting
