Steps For Oir Line Card Removal And Insertion - Cisco ASR 9000 Series Installation Manual
Aggregation services router ethernet line card
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Removing and Installing a Line Card
Steps for OIR Line Card Removal and Insertion
Online insertion and removal (OIR) is supported, enabling you to install a card while the line card is
operating. Follow these steps when removing or inserting a line card by using the Cisco IOS XR
shutdown command.
Shut down the line card location with the (admin-config) hw-module shutdown location 0/0/CPU0
Step 1
command (where R is the rack number and S is the slot number).
Confirm that the LEDs have gone from green to off.
Step 2
Physically remove the line card to be replaced.
Step 3
Physically insert the replacement line card.
Step 4
Return the line card to the up state with the (admin-config) hw-module shutdown location 0/0/CPU0
Step 5
command.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
2-10
Chapter 2
Installing Line Cards in the Cisco ASR 9000 Series Router
Advertisement
Table of Contents
Troubleshooting
