C H A P T E R 2 Preparing The Cisco Ubr7200 Series Router For Installation; Lifting The Cisco Ubr7200 Series Router Safely; Safety Recommendations - Cisco 7246 - uBR Router Hardware Installation Manual
Universal broadband router
Hide thumbs
Also See for 7246 - uBR Router:
- Configuring (28 pages) ,
- User manual (7 pages) ,
- Supplementary manual (42 pages)
Table of Contents
Advertisement
Safety Recommendations
•
•
•
•
•
Only trained and qualified personnel should be allowed to install or replace this equipment.
Warning
Statement 1030
For Australia and New Zealand, equipment is to be installed and maintained by service personnel only
Note
as defined by AS/NZS 3260 Clause 1.2.14.3 Service Personnel.
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with
Warning
the same or equivalent type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer's instructions. Statement 1015
Lifting the Cisco uBR7200 Series Router Safely
Before you install any of the routers, ensure that your site configuration is properly designed and
prepared so that you can avoid having to move the router later to accommodate power sources and
network connections.
•
•
Whenever you lift a chassis or any heavy object, follow these guidelines:
•
•
•
•
•
Cisco uBR7200 Series Universal Broadband Router Hardware Installation Guide
2-2
Keep tools and chassis components away from walk areas.
Do not wear loose clothing, jewelry (including rings and chains), or other items that could get caught
in the chassis.
For systems with installed AC-input power supplies, the Cisco uBR7200 series router ships with a
3-wire electrical grounding-type plug, which only fits into a grounding-type power outlet. This is a
safety feature. The equipment grounding should be in accordance with local and national electrical
codes.
For systems with installed DC-input power supplies, the Cisco uBR7200 series router does not ship
with any power cables. Use a minimum of 12 AWG (4 mm
power supply. The equipment grounding should be in accordance with local and national electrical
codes.
The Cisco uBR7200 series router operates safely when it is used in accordance with its marked
electrical ratings and product usage instructions.
A fully configured Cisco uBR7246 router weighs approximately 100 pounds (45.4 kilograms).
A fully configured Cisco uBR7246VXR router weighs approximately 100 pounds (45.4 kilograms).
Always disconnect all external cables before lifting or moving the chassis.
Do not attempt to lift the chassis by yourself; have someone assist you (see
Ensure that your footing is solid, and balance the weight of the object between your feet.
Lift the chassis slowly; never move suddenly or twist your body as you lift.
Keep your back straight and lift with your legs, not your back. If you must bend down to lift the
chassis, bend at the knees, not at the waist, to reduce the strain on your lower back muscles.
Chapter 2
Preparing the Cisco uBR7200 Series Router for Installation
2
) wire for the input to each DC-input
Figure 2-1 on page
2-3).
OL-5421-03
Advertisement
Table of Contents
Troubleshooting
