Table of Contents
Advertisement
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
DETAILED STEPS
Step 1
enable
Example:
Router> enable
Step 2
vlan database
Example:
Router# vlan database
Step 3
vtp transparent
Example:
Router(vlan)# vtp transparent
Step 4
exit
Example:
Router(vlan)# exit
Verifying VTP
Use the show vtp status command to verify VTP status:
Router# show vtp status
VTP Version
Configuration Revision
Maximum VLANs supported locally : 256
Number of existing VLANs
VTP Operating Mode
VTP Domain Name
VTP Pruning Mode
VTP V2 Mode
VTP Traps Generation
MD5 digest
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
Local updater ID is 1.3.214.25 on interface Fa0/0 (first interface found)
Router#
Configuring Layer 2 Interfaces
This section provides the following configuration information:
•
•
•
Configuring a Range of Interfaces, page 14
Defining a Range Macro, page 14
Configuring Layer 2 Optional Interface Features, page 15
Enables privileged EXEC mode.
•
Enter your password if prompted.
Enters VLAN configuration mode.
Configures VTP transparent mode.
Updates the VLAN database, propagates it throughout the
administrative domain, exits VLAN configuration mode, and
returns to privileged EXEC mode.
: 2
: 0
: 5
: Server
:
: Disabled
: Disabled
: Disabled
: 0xBF 0x86 0x94 0x45 0xFC 0xDF 0xB5 0x70
(required)
(optional)
(optional)
How to Configure EtherSwitch HWICs
Book Title
13
- Quick Links:
- Configuring Vlans
Hide quick links:
Advertisement
Chapters
Table of Contents
