Table of Contents
Advertisement
How to Configure EtherSwitch HWICs
Configuring Cisco Discovery Protocol
•
•
•
Enabling Cisco Discovery Protocol
To enable Cisco Discovery Protocol (CDP) globally, use the following commands.
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
cdp run
Example:
Router(config)# cdp run
Step 4
end
Example:
Router(config)# end
Step 5
show cdp
Example:
Router# show cdp
Book Title
50
Enabling Cisco Discovery Protocol, page 50
Enabling CDP on an Interface, page 51
Monitoring and Maintaining CDP, page 52
enable
configure terminal
cdp run
end
show cdp
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Purpose
Enables privileged EXEC mode.
•
Enter your password if prompted.
Enters global configuration mode.
Enables CDP globally.
Returns to privileged EXEC mode.
Verifies the CDP configuration.
- Quick Links:
- Configuring Vlans
Hide quick links:
Advertisement
Chapters
Table of Contents
