hit counter script
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Switch
  5. HWIC-4ESW - EtherSwitch HWIC Switch
  6. User manual

Cisco HWIC-4ESW User Manual page 27

Etherswitch interface cards
Hide thumbs Also See for HWIC-4ESW:
Table of Contents

Advertisement

Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
configured for the same service—for example, authentication—the second host entry configured acts as
the fail-over backup to the first one. The RADIUS host entries are tried in the order that they were
configured.
Follow these steps to configure the RADIUS server parameters on the switch. This procedure is required.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
radius-server host {hostname | ip-address}
auth-port port-number key string
Example:
Router# raduis-server host hostseven auth-port
75 key newauthority75
enable
configure terminal
radius-server host {hostname | ip-address} auth-port port-number key string
end
show running-config
copy running-config startup-config
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Configures the RADIUS server parameters on the switch.
For hostname | ip-address, specify the host name or IP
•
address of the remote RADIUS server.
For auth-port port-number, specify the UDP
•
destination port for authentication requests. The default
is 1645.
For key string, specify the authentication and
•
encryption key used between the switch and the
RADIUS daemon running on the RADIUS server. The
key is a text string that must match the encryption key
used on the RADIUS server.
Always configure the key as the last item in the
Note
radius-server host command syntax because
leading spaces are ignored, but spaces within and at
the end of the key are used. If you use spaces in the
key, do not enclose the key in quotation marks
unless the quotation marks are part of the key. This
key must match the encryption used on the
RADIUS daemon.
If you want to use multiple RADIUS servers, repeat this
•
command.
How to Configure EtherSwitch HWICs
Book Title
27
Show Quick Links

Hide quick links:

Advertisement

Table of Contents
loading

Related Manuals for Cisco HWIC-4ESW

Related Products for Cisco HWIC-4ESW

This manual is also suitable for:

Hwic-d-9esw

Table of Contents