Table of Contents
Advertisement
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
dot1x default
Example:
Router(config)# dot1x default
Step 4
end
Example:
Router(config)# end
Step 5
show dot1x
Example:
Router# show dot1x
Step 6
copy running-config startup-config
Example:
Router# copy running-config startup-config
Displaying 802.1x Statistics and Status
To display 802.1x statistics for all interfaces, use the show dot1x statistics privileged EXEC command.
To display 802.1x statistics for a specific interface, use the show dot1x statistics interface interface-id
privileged EXEC command.
To display the 802.1x administrative and operational status for the switch, use the show dot1x privileged
EXEC command. To display the 802.1x administrative and operational status for a specific interface, use
the show dot1x interface interface-id privileged EXEC command.
Configuring Spanning Tree
•
•
•
•
•
Enabling Spanning Tree, page 36
Configuring Spanning Tree Port Priority, page 37
Configuring Spanning Tree Port Cost, page 38
Configuring the Bridge Priority of a VLAN, page 41
Configuring Hello Time, page 42
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Resets the configurable 802.1x parameters to the default
values.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
How to Configure EtherSwitch HWICs
Book Title
35
- Quick Links:
- Configuring Vlans
Hide quick links:
Advertisement
Chapters
Table of Contents
