Table of Contents
Advertisement
How to Configure EtherSwitch HWICs
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
Router(config)# mac-address-table static
mac-address fastethernet interface-id [vlan
vlan-id]
Example:
Router(config)# mac-address-table static
00ff.ff0d.2dc0 fastethernet 0/1/1
Step 4
end
Example:
Router(config)# end
Step 5
show mac-address-table
Example:
Router# show mac-address-table
Example
Use the show mac command to verify the MAC address table, as illustrated below:
Router# show mac-address-table
Destination Address
-------------------
00ff.ff0d.2dc0
0007.ebc7.ff84
0007.ebc8.018b
000b.bf94.0006
000b.bf94.0038
000b.bf94.0039
000b.bf94.0008
000b.bf94.0038
000b.bf94.0008
000b.bf94.0038
000b.bf94.0008
000b.bf94.0038
Book Title
48
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Creates a static entry in the MAC address table.
When the vlan-id is not specified, VLAN 1 is taken by default.
Returns to privileged EXEC mode.
Verifies the MAC address table.
Address Type
VLAN
Destination Port
------------
----
--------------------
Self
1
Vlan1
Static
1
FastEthernet0/3/5
Static
1
FastEthernet0/3/6
Static
1
FastEthernet0/3/3
Static
1
FastEthernet0/3/0
Static
1
FastEthernet0/3/1
Static
314
FastEthernet0/3/2
Static
314
FastEthernet0/3/0
Static
331
FastEthernet0/3/2
Static
331
FastEthernet0/3/0
Static
348
FastEthernet0/3/2
Static
348
FastEthernet0/3/0
- Quick Links:
- Configuring Vlans
Hide quick links:
Advertisement
Chapters
Table of Contents
