Table of Contents
Advertisement
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Configuring and Verifying the Aging Timer
The aging timer may be configured from 16 seconds to 4080 seconds, in 16-second increments.
Follow these steps to configure the aging timer.
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
mac-address-table aging-time time
Example:
Router(config)# mac-address-table aging-time
4080
Step 4
end
Example:
Router(config)# end
Step 5
show mac-address-table aging-time
Example:
Router# show mac-address-table aging-time
Example
Use the show mac-address-table aging-time command to verify the MAC address table aging timer, as
illustrated below:
Router # show mac-address-table aging-time
Mac address aging time 320
enable
configure terminal
mac-address-table aging-time time
end
show mac-address-table aging-time
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Configures the MAC address aging timer age in seconds.
The range is 0 to 10000 seconds.
•
Returns to privileged EXEC mode.
Verifies the MAC address table.
How to Configure EtherSwitch HWICs
Book Title
49
- Quick Links:
- Configuring Vlans
Hide quick links:
Advertisement
Chapters
Table of Contents
