Table of Contents
Advertisement
How to Configure EtherSwitch HWICs
6.
DETAILED STEPS
Command
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
bridge bridge-group hello-time
seconds
Example:
Router(config-if)# bridge 100
hello-time 5
Step 4
end
Example:
Router(config-if)# end
Step 5
show running-config
Example:
Router: show running-config
Step 6
copy running-config startup-config
Example:
Router# copy running-config
startup-config
To return to the default setting, use the no bridge bridge-group hello-time global configuration
command.
Changing the Forward-Delay Interval
The forward-delay interval is the amount of time spent listening for topology change information after
an interface has been activated for switching and before forwarding actually begins.
Follow the steps below to change the forward-delay interval.
SUMMARY STEPS
1.
2.
Book Title
84
copy running-config startup-config
enable
configure terminal
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Specifies the interval between hello BPDUs.
For bridge-group, specify the bridge group number. The range is 1
•
to 255.
For seconds, enter a number from 1 to 10. The default is 2 seconds.
•
Returns to privileged EXEC mode.
Verifies your entry.
(Optional) Saves your entry in the configuration file.
- Quick Links:
- Configuring Vlans
Hide quick links:
Advertisement
Chapters
Table of Contents
