Table of Contents
Advertisement
How to Configure EtherSwitch HWICs
Managing the EtherSwitch HWIC
This section describes how to perform basic management tasks on the HWICs with the Cisco IOS
command line interface. You might find this information useful when you configure the switch for the
purposed described in the preceding sections.
The following topics are included:
•
•
•
•
•
•
•
•
•
Adding Trap Managers
A trap manager is a management station that receives and processes traps. When you configure a trap
manager, community strings for each member switch must be unique. If a member switch has an IP
address assigned to it, the management station accesses the switch by using its assigned IP address.
By default, no trap manager is defined, and no traps are issued.
Follow these steps to add a trap manager and community string.
SUMMARY STEPS
1.
2.
3.
4.
DETAILED STEPS
Command
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Book Title
92
Adding Trap Managers, page 92
Configuring IP Information, page 93
Enabling Switch Port Analyzer, page 96
Managing the ARP Table, page 98
Managing the MAC Address Tables, page 98
Removing Dynamic Addresses, page 100
Adding Secure Addresses, page 101
Configuring Static Addresses, page 103
Clearing All MAC Address Tables, page 105
enable
configure terminal
snmp-server host ip-address traps snmp vlan-membership
end
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Purpose
Enables privileged EXEC mode.
•
Enter your password if prompted.
Enters global configuration mode.
- Quick Links:
- Configuring Vlans
Hide quick links:
Advertisement
Chapters
Table of Contents
