Table of Contents
Advertisement
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Number of transitions to forwarding state: 1
BPDU: sent 0, received 13513
Router#
Configuring the Bridge Priority of a VLAN
Use the following task to configure the spanning tree bridge priority of a VLAN.
SUMMARY STEPS
1.
2.
3.
4.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
spanning-tree vlan vlan-ID priority
bridge-priority
Example:
Router(config)# spanning-tree vlan 200 priority
2
Step 4
show spanning-tree vlan bridge
Example:
Router(config-if)# spanning-tree cost 200
enable
configure terminal
spanning-tree vlan vlan-ID priority bridge-priority
show spanning-tree vlan bridge [brief]
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Configures the bridge priority of a VLAN. The
bridge_priority value can be from 1 to 65535.
•
Use the no form of this command to restore the
defaults.
Exercise care when using this command. For
Caution
most situations spanning-tree vlan vlan-ID root
primary and the spanning-tree vlan vlan-ID
root secondary are the preferred commands to
modify the bridge priority.
Verifies the bridge priority.
How to Configure EtherSwitch HWICs
Book Title
41
- Quick Links:
- Configuring Vlans
Hide quick links:
Advertisement
Chapters
Table of Contents
