Accounting Interim Variation - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Subscriber Commands
accounting interim variation
To introduce a random delay between successive interim accounting messages of sessions or services in BNG,
use the accounting interim variation command in subscriber manager configuration mode. To remove this
random delay, use the no form of this command.
accounting interim variation value
no accounting interim variation
Syntax Description
value
Command Default
By default, randomization is disabled.
Command Modes
Subscriber manager configuration
Command History
Release
Release 5.2.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Follow these usage guidelines while applying randomization:
• Randomization cannot be applied for too small interim timeouts (that is, for timeouts less than 2 minutes).
• If interim timeout is T seconds, the value x is selected from an interval [L, T]. By default, L is 100
• The maximum value of T- L is 900 seconds (that is, 15 minutes).
Task ID
Task ID
config-services
Interim timeout randomization value, in percentage.
The range is from 0 to 50. By default, this value is zero (0), which means there is no
interim timeout randomization.
percent of T (that is, 0% variance from T).
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
Operation
read, write
accounting interim variation
5.2.x
513
Advertisement
Chapters
Table of Contents
