Cisco ASR 9000 Series Command Reference Manual page 492
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
show pppoe throttles
Field
Monitor
Time left
Since reset
PADI
PADR
Related Commands
Command
pppoe sessions throttle, on page 460
show pppoe limits, on page 466
show pppoe interfaces, on page 464
show pppoe statistics, on page 470
show pppoe summary, on page 473
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
478
Description
Specifies that the packets are counted, but the throttle
is not yet active.
Specifies the time remaining until the throttle enters
idle state, or if the throttle is already in idle state, the
time until the throttle entry is removed.
Specifies the time since the throttle counters were last
reset. Throttle counters are reset upon entering the
idle state.
Specifies the number of PADI messages received
which match the entry criteria (say, mac address).
Specifies the number of PADR messages received
which match the entry criteria (say, mac address).
Description
Configures a throttle value for PPPoE sessions for a PPPoE
BBA-Group in BNG.
Shows the PPPoE session limit information.
Shows a summary of the protocol state for the specified PPPoE
interface filtered by circuit-id, remote-id, interface, or location.
Shows the counters for packets received and sent by the PPPoE
sessions.
Shows summary information of the PPPoE sessions.
PPPoE Commands
Advertisement
Chapters
Table of Contents
