show pppoe limits
MAC-IWF session limits not configured.
Circuit-ID session limit information:
Maximum session limit: 10 sessions
Warning threshold:
Circuit-ID
----------
circuit0
Remote-ID session limit information:
Maximum session limit: 10 sessions
Warning threshold:
Remote-ID
----------
remote10
MAC-Access-Interface session limits not configured.
MAC-IWF-Access-Interface session limits not configured.
Inner-VLAN-ID session limit information:
Maximum session limit: 10 sessions
Warning threshold:
Access-Int
----------
BE2.10
Outer-VLAN-ID session limit information:
Maximum session limit: 10 sessions
Warning threshold:
Access-Int
----------
BE2.10
VLAN-ID session limit information:
Maximum session limit: 10 sessions
Warning threshold:
Access-Int
----------
BE2.10
Circuit-ID-and-Remote-ID session limit information:
Maximum session limit: 10 sessions
Warning threshold:
Circuit-ID
Remote-ID
-----------
circuit0
remote10
This table describes the significant fields displayed in the show pppoe limits command output :
Field
Block
OK
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
468
8 sessions
8 sessions
8 sessions
Inner VLAN ID
-------------
10
8 sessions
Outer VLAN ID
-------------
10
8 sessions
Outer, Inner VLAN ID
--------------------
10, 10
8 sessions
Description
Specifies that the number of sessions is at the
maximum limit.
Specifies that the number of sessions is below the
maximum limit and the warning threshold (if
configured).
PPPoE Commands
State
#Sessions
-----
---------
Block
10
State
#Sessions
-----
---------
Block
10
State
#Sessions
-----
---------
Block
10
State
#Sessions
-----
---------
Block
10
State
#Sessions
-----
---------
Block
10
State
#Sessions
(/Max)
-----
---------
Block
10