Process-Failures Switchover - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
PPPoE LAC-Specific Commands
process-failures switchover
To force a switchover in case of a process failure, use the process-failures switchover command in VPDN
redundancy configuration mode.
process-failures switchover
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
VPDN redundancy configuration mode
Command History
Release
Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
tunnel
Examples
This is an example of enabling process-failures switchover.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# vpdn
RP/0/RSP0/CPU0:router(config-vpdn)# redundancy
RP/0/RSP0/CPU0:router(config-vpdn-redundancy)# process-failures switchover
RP/0/RSP0/CPU0:router(config-vpdn-redundancy)#
Related Commands
Command
vpdn, on page 424
redundancy (BNG), on page 417
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
Operation
read, write
Description
Configures VPDN and enters the VPDN
sub-configuration mode.
Enables VPDN redundancy and enters the VPDN
redundancy configuration mode.
process-failures switchover
5.2.x
415
Advertisement
Chapters
Table of Contents
