Cisco ASR 9000 Series Command Reference Manual page 399

Aggregation services router broadband network gateway

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

BNG PPP Commands

To enable the link control protocol (LCP) on PPP interfaces, use the ppp lcp command in the dynamic template

configuration mode. To disable this feature, use the no form of this command.

ppp lcp [ delay delay_seconds delay_milliseconds | renegotiation ignore ]

Syntax Description

delay_seconds

delay_milliseconds

renegotiation

Command Default

Command Modes

Dynamic template configuration

Command History

Release 4.2.0

Usage Guidelines

Use the dynamic-template type ppp command to enter the ppp dynamic template type configuration mode.

This is an example of configuring the ppp lcp command in the dynamic template configuration mode:

RP/0/RSP0/CPU0:router# configure

Sets the time to delay before starting active LCP negotiations.

Specifies the delay time in seconds. The value ranges from 0-255.

Specifies the delay time in milliseconds. The value ranges from 0-999.

Specifies the peer renegotiation options.

Specifies the number of attempts that can be ignored by the peer to

renegotiate LCP.

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release

Modification

This command was introduced.

Chapters

Table of Contents