Dynamic-Template Type Service - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
dynamic-template type service
dynamic-template type service
To group a set of configuration items that can be applied to a group of subscribers based on the service template
type and to enter the dynamic-template configuration mode, use the dynamic-template type service command.
To disable this feature and exit the dynamic-template configuration mode, use the no form of this command.
dynamic-template type service template-name
no dynamic-template type service template-name
Syntax Description
template-name
Command Default
None
Command Modes
Dynamic template configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
Use the dynamic-template command to enter dynamic template configuration mode.
Task ID
Task ID
config-services
Examples
This is an example of configuring the dynamic-template type service command:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# dynamic-template
RP/0/RSP0/CPU0:router(config-dynamic-template)# type service s1
Related Commands
Command
dynamic-template, on page 232
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
238
Specifies the dynamic template name.
Modification
This command was introduced.
Operation
read, write
Dynamic Template Commands
Description
Enables the dynamic template
configuration mode.
Advertisement
Chapters
Table of Contents
