Dynamic-Template Type Ppp - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
dynamic-template type ppp
dynamic-template type ppp
To group a set of configuration items that can be applied to a group of subscribers based on the ppp template
type and to enter the dynamic-template configuration mode, use the dynamic-template type ppp command.
To disable this feature and exit the dynamic-template configuration mode, use the no form of this command.
dynamic-template type ppp template-name
no dynamic-template type ppp template-name
Syntax Description
template-name
Command Default
None
Command Modes
Dynamic template configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
Use the dynamic-template command to enter dynamic template configuration mode.
Task ID
Task ID
config-services
Examples
This is an example of configuring the dynamic-template type ppp command:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# dynamic-template
RP/0/RSP0/CPU0:router(config-dynamic-template)# type ppp p1
Related Commands
Command
dynamic-template, on page 232
dynamic-template type ipsubscriber, on page 234
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
236
Specifies the dynamic template name.
Modification
This command was introduced.
Operation
read, write
Description
Enables the dynamic template configuration mode.
Enables the ipsubscriber dynamic template type.
Dynamic Template Commands
Advertisement
Chapters
Table of Contents
