Domain-Name (Dhcp Ipv6 Pool-Bng) - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
domain-name (DHCP IPv6 pool-BNG)
domain-name (DHCP IPv6 pool-BNG)
To configure a domain name for a Dynamic Host Configuration Protocol (DHCP) for IPv6 client, use the
domain-name command in an appropriate configuration mode. To remove the domain name, use the no form
of this command.
domain-name domain
no domain-name
Syntax Description
domain
Command Default
When a DHCP for IPv6 pool is first created, no domain name for clients is configured.
Command Modes
DHCP IPv6 server profile configuration
DHCP IPv6 server profile class configuration
Command History
Release
Release 4.3.0
Usage Guidelines
Multiple Domain Name System (DNS) domain names can be configured by issuing the domain-name
command multiple times. The new domain name does not overwrite existing domain names.
To enter the DHCP IPv6 server profile configuration, enter profile profile_name server command in the
DHCPv6 configuration mode.
To enter the DHCP IPv6 server profile class configuration, enter class class_name command in the DHCPv6
server profile configuration mode.
The domain name is defined in DHCP IPv6 server profile and DHCP IPv6 server profile class configuration.
If the same parameters are defined in the class scope, then the values defined in the class scope takes precedence.
Task ID
Task ID
ip-services
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
154
Specifies the domain name string to be used by the client.
Modification
This command was supported in DHCP IPv6 server profile and class
configuration mode in BNG.
Operations
read, write
BNG DHCP Commands
Advertisement
Chapters
Table of Contents
