Show Pool Ipv6 Name - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router broadband network gateway

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

show pool ipv6 name

To show the status of an IPv6 pool, use the show pool ipv6 name command in the EXEC mode.

show pool ipv6 name pool_name{location| verbose| }

Syntax Description

Command Default

Command Modes

Command History

Release 4.3.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task

IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA

administrator for assistance.

Use thepool ipv6 command to enter Pool IPv6 configuration submode.

This is the sample output for the show pool ipv6 name command:

RP/0/RSP0/CPU0:router# show pool ipv4 name POOL_A6_i_1

---------------------------------------------------

Pool Scope: VRF Specific Pool

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,

Release 5.2.x

Specifies the name of the IPv6 pool.

Specifies the location of the IPv6 pool.

Displays all allocations for the pools.

Specifies the output modifiers.

Modification

This command was introduced.

Pool POOL_A6_i_1 Allocations

Address Pool Service Commands

Table of Contents