Pool Vrf - Cisco ASR 9000 Series Command Reference Manual
Aggregation services router broadband network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
pool vrf
pool vrf
To enable distributed address pool service on a vrf and to enter the corresponding configuration submode,
use the pool vrf command in the Global Configuration mode. To disable this feature, use the no form of this
command.
pool vrf {vrf_name| all}{ipv4| pool_name| ipv6| pool_name}
no pool vrf {vrf_name| all}{ipv4| pool_name| ipv6| pool_name}
Syntax Description
vrf_name
ipv4
ipv6
pool_name
all
Command Default
None
Command Modes
Global Configuration mode
Command History
Release
Release 4.2.0
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the pool ipv4 command to enter IPv4 pool configuration submode and pool ipv6 command to enter IPv6
pool configuration submode.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
90
Specifies the name of the vrf.
Specifies IPv4 pool name. Each pool must have a
unique name across all VRFs.
Specifies IPv6 pool name. Each pool must have a
unique name across all VRFs.
Specifies the name of the pool for IPv4 or IPv6.
Specifies the global pool.
Modification
This command was introduced.
Support for IPv6 was added.
Address Pool Service Commands
Advertisement
Chapters
Table of Contents
