Installing the Cisco ASR 1002-F Router in a Rack
Figure 9-14
Figure 9-14
3
1
2
Step 2
Position the rear rack-mount bracket top hole with the chassis top hole from the back.
Insert and tighten the screws on one side.
Step 3
Repeat Step 1 through Step 3 on the other side of the chassis. Use the remaining screws to secure the
Step 4
rear rack-mount brackets to the chassis.
This completes the steps for attaching the rear rack-mount brackets to the Cisco ASR 1002-F Router.
Before you mount the Cisco ASR 1002-F Router in a rack, make certain you understand which
Caution
rack-mount bracket ear holes to use when positioning the chassis in the rack. As a result of using the
designated ear holes on the rack-mount bracket, the cable-management bracket installation will be made
easier.
Installing the Cisco ASR 1002-F Router in a Rack
After installing the rack-mount brackets on the chassis, you mount the chassis by securing the
rack-mount brackets to two posts or mounting strips in the rack using the screws provided.
Because the rack-mount brackets support the weight of the entire chassis, be sure to use all the screws
Note
to fasten the rack-mount brackets to the rack posts.
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
Warning
precautions to ensure that the system remains stable.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
9-18
shows where to attach the rear rack-mount brackets to the Cisco ASR 1002-F Router.
Attaching the Rear Rack-Mount Brackets to the Cisco ASR 1002-F Router
2
Rear rack-mount bracket ear and holes
Rear rack-mount bracket
Chapter 9
1
3
Rear rack-mount bracket screws
— —
Cisco ASR 1002-F Router Overview and Installation
OL-13208-11