Slide Tab Sfp Or Sfp+ Module; Installing A Slide Tab Sfp Or Sfp+ Module - Cisco ASR 9000 Series Installation Manual
Aggregation services router ethernet line card
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Installing and Removing SFP Modules
Grasp the actuator button between your thumb and index finger and carefully pull the SFP module from
Step 4
the port.
Step 5
Place the removed SFP module on an antistatic mat, or immediately place it in a static shielding bag if
you plan to return it to the factory.
Step 6
Protect your line card by inserting clean SFP module cage covers into the optical module cage when
there is no SFP module installed.
Slide Tab SFP or SFP+ Module
The slide tab SFP or SFP+ module has a tab underneath the front of the module that you use to disengage
the module from a port
Figure 2-19
Installing a Slide Tab SFP or SFP+ Module
To install this type of SFP module into a line card, follow these steps:
Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
Step 1
Line up the SFP module with the port and gently push on it until it snaps into the slot tightly
Step 2
(Figure
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
2-36
(Figure
2-19).
Slide Tab SFP or SFP+ Module
2-20).
Chapter 2
Installing Line Cards in the Cisco ASR 9000 Series Router
Advertisement
Table of Contents
Troubleshooting
