Product-Specific Parameters
Product-Specific Parameters
Cisco Unified Communications Manager Administration allows you to set some product specific configuration
parameters for Cisco Unified IP Phones. The following table lists the configuration windows and path in Cisco
Unified Communications Manager Administration.
Table 35: Configuration Windows for Cisco Unified IP Phone
Configuration window
Enterprise Phone Configuration window
Common Phone Profile window
Phone Configuration window
You can set the following parameters in any of the three configuration windows:
• Settings Access
• Video Capabilities
• Web Access
• Load Server
• RTCP
• Peer Firmware Sharing
• Cisco Discovery Protocol (CDP): Switch Port
• Cisco Discovery Protocol (CDP): PC Port
• Link Layer Discovery Protocol - Media Endpoint Discover (LLDP-MED): Switch Port
• Link Layer Discovery Protocol (LLDP): PC Port
• IPv6 Load Server
• 802.1x Authentication
• Switch Port Remote Configuration
• PC Port Remote Configuration
• Automatic Port Synchronization
• SSH Access
When you set the parameters, select the Override Common Settings check box for each setting you wish to
update. If you do not check this box, the corresponding parameter setting does not take effect. If you set the
parameters at the three configuration windows, the setting takes precedence in the following order:
• Phone Configuration window (highest precedence)
• Common Phone Profile Configuration window
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
144
Path
System > Enterprise Phone Configuration
Device > Device Settings > Common Phone Profile
Device > Phone; Product Specific Configuration area of window
Features, Templates, Services, and Users