Cisco 7941G Administration Manual page 86
For cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs
Also See for 7941G:
- Administration manual (302 pages) ,
- User manual (132 pages) ,
- Phone manual (92 pages)
Table of Contents
Advertisement
Network Configuration Menu
Option
Admin. VLAN ID
SW Port Configuration
PC Port Configuration
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
66
Description
Auxiliary VLAN in which the phone is a
member.
Used only if the phone does not receive an
auxiliary VLAN from the switch; otherwise it
is ignored.
Speed and duplex of the network port. Valid
values:
• autonegotiate
• 10 Half—10-BaseT/half duplex
• 10 Full—10-BaseT/full duplex
• 100 Half—100-BaseT/half duplex
• 100 Full—100-BaseT/full duplex
• 1000 Full—1000-BaseT/full duplex
If the phone is connected to a switch, configure
the port on the switch to the same speed/duplex
as the phone, or configure both to
auto-negotiate.
If you change the setting of this option, you
must change the PC Port Configuration option
to the same setting.
Speed and duplex of the access port. Valid
values:
• autonegotiate
• 10 Half—10-BaseT/half duplex
• 10 Full—10-BaseT/full duplex
• 100 Half—100-BaseT/half duplex
• 100 Full—100-BaseT/full duplex
• 1000 Full—1000-BaseT/full duplex
If the phone is connected to a switch, configure
the port on the switch to the same speed/duplex
as the phone, or configure both to
auto-negotiate.
If you change the setting of this option, you
must change the SW Port Configuration option
to the same setting.
Cisco Unified IP Phone Settings
To Change
Set Admin VLAN ID Field, on
page 76
Set SW Port Configuration Field,
on page 76
Set PC Port Configuration Field,
on page 76
- Quick Links:
- Cisco Unified Ip Phone 7942G
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
