hit counter script

Check Tftp Settings; Check Dhcp Settings; Verify Dns Settings - Cisco 7941G Administration Manual

For cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs Also See for 7941G:
Table of Contents

Advertisement

Troubleshooting and Maintenance

Check TFTP Settings

Procedure
Step 1
You can determine the IP address of the TFTP server used by the phone by pressing Settings, choosing
Network Configuration > IPv4 and scrolling to the TFTP Server 1 option.
Step 2
If you have assigned a static IP address to the phone, you must manually enter a setting for the TFTP Server
1 option. See
Step 3
If you are using DHCP, the phone obtains the address for the TFTP server from the DHCP server. Check the
IP address configured in Option 150.
Step 4
You can also enable the phone to use an alternate TFTP server. Such a setting is particularly useful if the
phone was recently moved from one location to another. See
instructions.

Check DHCP Settings

Procedure
Step 1
On the Cisco Unified IP Phone, choose Settings > Network Configuration > IPv4 Configuration, and look
at the following options:
• DHCP Server: If you have assigned a static IP address to the phone, you do not need to enter a value
for the DHCP Server option. However, if you are using a DHCP server, this option must have a value.
If it does not, check your IP routing and VLAN configuration. See the Troubleshooting Switch Port and
Interface Problems document, available at this URL :
http://www.cisco.com/en/US/products/hw/switches/ps708/prod_tech_notes_list.html
• IP Address, Subnet Mask, Default Router: If you have assigned a static IP address to the phone, you
must manually enter settings for these options. See
instructions.
Step 2
If you are using DHCP, check the IP addresses distributed by your DHCP server. See the Understanding and
Troubleshooting DHCP in Catalyst Switch or Enterprise Networks document, available at this URL:
www.cisco.com/en/US/tech/tk648/tk361/tech_tech_notes_list.html

Verify DNS Settings

To verify DNS settings, perform these steps.
Network Configuration Menu, on page
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Troubleshooting Procedures
64.
Network Configuration Menu, on page 64
Network Configuration Menu, on page 64
Communications Manager 9.0 (SCCP and SIP)
for
for
http://
223

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7941g-ge7961g7961g-ge7962g7942g

Table of Contents